Editorial
The Heritage 1948 Chronograph is Tissot's faithful re-edition of their landmark 1948 Swiss chronograph, one of the first automatic chronographs to reach commercial production. At 39.5mm in steel with a black dial, Arabic numerals, and a three-register layout, it wears almost exactly as the original did. This is a rare case where the historical model behind the re-edition is genuine and well-documented, not marketing mythology.
Tissot introduced the T66.1.722.33 in 2011 as part of the Heritage line, drawing directly from archive pieces. The movement is the ETA 2894-2, a solid Swiss automatic column-wheel chronograph with date, running at 28,800 vph. The dial layout preserves the three subsidiary registers of the original: running seconds at nine, thirty-minute counter at three, and twelve-hour counter at six.
Production has continued since 2011 with only minor variant changes, primarily in strap options. Tissot also produced a white dial version and limited references, but the black dial T66 is the closest to the 1948 original in feel.
The chronograph pushers on ETA 2894-2 examples can develop sticky return if the watch sat unworn for years without service. Check that both pushers engage crisply and that the reset snaps cleanly back to zero without hanging. The dial printing on earlier examples can show fading around the subdial tracks under magnification, so inspect under good light before buying used.
Lug and case edge wear shows quickly on this model because the finishing is relatively flat, so look at the lug tips carefully on pre-owned pieces. Verify the crystal is original and unscratched; replacement costs are modest but a cracked or chipped crystal is a negotiating point.
